LEARN WHY KNOWING VALVE LOCATION MATTERS

Learn Why Knowing Valve Location Matters

Learn Why Knowing Valve Location Matters

Blog Article

Book Service Now

What are your ideas on How To Protect Your Home From Water Damage?


The Six Locations to Locate the Water Shut-Off Valve
The plumbing system of your house is a complex network of pipes and also shut-off shutoffs. In the occasion of an emergency, you can reduce the water using the shutoffs.

Why Must I Bother with This?



Your washroom sink is faulty, so you can conveniently discover the shut-off shutoff beneath the sink. For major leakages, you need to close the mainline shut-off shutoff.

Understanding exactly how to do this is important in an emergency. The longer you wait to close the shut-off shutoff, the much more extensive the damages will be. Besides, you might not have sufficient time to identify just how to shut the shutoffs when you're worrying amidst an emergency. Discovering it currently is the very best thing so you can stay calm under pressure.

What Does the Shut-Off Valve Appear Like?



This is generally a handle that permits you to turn off the water for a certain appliance, a localized location (for example the whole 2nd floor), or for the entire residential or commercial property. It is important to know where these shutoffs are, so when something turn up in any type of area of your residence, you can close it as soon as possible. This will assist you stay clear of considerable water damages that will set you back thousands to repair.

Where are These Found?



Your ideal wager is to call a water remediation solutions business for advice. If you have a fairly moderate-sized residence, try looking for a knob or bar.
  • On the perimeter wall surface

  • If you have a cellar, browse at the eye degree

  • If you are on the ground floor, look for it on a lower flooring

  • The main shut-off shutoff is generally near the outside water meter

  • Under the sink

  • Next to the water heater


  • It must be shown in those papers if you have a house inspection record from when you bought your property. However, if you built it from the ground up, it needs to be in the plans. Usually, home builders install the valves near or within the main, ground-floor bathrooms. The valves are expected to be visible, some pick to camouflage them for aesthetic reasons.

    When to Call a Specialist?



    Should the aforementioned be the case for your localized valves, you have no other option yet to shut off the main water line, reducing the source of water in your whole residence. Then call the plumber to inspect the issue and also shut down the valve because area just so you can make use of the rest of the plumbing in various other locations of your house.

    Remember, these valves are lifesavers as well as important for any plumbing repair. In the occasion of a plumbing emergency, closed down these shutoffs to prevent problems that call a trustworthy water damages reconstruction company.


    The plumbing system of your residence is a complex network of pipes and shut-off shutoffs. In the event of an emergency, you can reduce the water utilizing the shutoffs. The longer you wait to close the shut-off shutoff, the a lot more comprehensive the damages will be. It is important to recognize where these valves are, so when something crops up in any type of area of your residence, you can close it right away. In the event of a plumbing emergency, closed down these valves to prevent complications that call a reputable water damages repair supplier.

    How to Find a Water Shut-off Valve Outside


    Why Do You Need to Shut-off the Main Water Valve?


    The pressure that keeps home faucets and appliances running does not stop when there’s a water line break. This means the water will continue to flow until the valve is shut off. A typical water pipe can carry 10 to15 gallons per minute, which is enough water to run a full cycle of laundry in the washing machine. Now, picture that amount of water soaking into your carpet and walls every minute. Not a pretty sight!



    In a panic-stricken state with water flowing around you, it’s unlikely you will want to stop and take the time to figure out where the valve is. Identifying it now will provide you with peace of mind and a swift action plan if the worst happens.


    Finding the Water Shut-off Valve


    Where is my main water valve? Your home has shut-off valves for individual appliances as well as one inside the perimeter of your home. If you aren’t sure where it’s located inside, or the problem is related to the mainline instead of an appliance, you will save time by going directly to the outside shut-off valve.



    If you have municipal water service, here’s how to find your outside water shut-off valve:



    Look for a rectangular or round cover that will be near the edge of your property, often between the curb and the sidewalk. Some water main valves are located along an alley, rather than the street. The cover may be metal or plastic, and it might say “water meter” to help with identification.



    Open the cover to the meter to find the water shut-off valve.



    If you have a private well, there may be a shut-off valve on or near your pressure tank.



    In either case, you can also typically find a shut-off valve in a utility space of the house where the water line enters the home. Some homes with municipal water service may have a shut-off valve on an exterior wall near the water meter.



    If you’re struggling with finding the water shut-off valve, you can check your home's property inspection report that you received when you purchased your home. Check the plumbing section of the report, which will identify the location of the valve along with a photo to guide you in the search.


    How to Shut Off the Water Valve


    To shut off an outside main water valve, you may need a couple of tools:



    If a security bolt is holding the cover down, you will need a socket wrench to remove the security bolt. Or, you may need to contact the municipal water supply provider to unlock the cover.



    You may need to pry the cover off with a screwdriver.



    For many water main valves, a water meter key is the ideal tool for adjusting the valve.



    If you don’t have a water meter key, channel locks will work.



    Once you have removed the cover, look inside the compartment to find the residential water supply shut-off valve, which will be the one located closest to your house. To turn off the valve, you can use a meter key or twist the valve closed with pliers. To stop the water flow to your home, turn the shut-off valve clockwise.

    https://www.mrrooter.com/about/blog/2020/august/how-to-find-a-water-shut-off-valve-outside/


    Water Shut-off Valve: its Role and Location in your Home

    Do you like more info about 3 Simple Approaches Against the Shower and Shower-based Water Damage? Write feedback down the page. We would be delighted to find out your thinking about this blog entry. We are looking forward that you come back again before long. Sharing is caring. Helping people is fun. Thank you for taking the time to read it.



    Drain woes? Connect.

    Report this page